Magnuson: Heartbeat 2300 Supercharger [C7 Corvette, Grand Sport, LT1]

Vendor: Magnuson

SKU: 01-23-62-171-TI

$6,999.00 $7,495.00
Looking for a nice boost in HP from your 2014+ C7 Corvette Stingray, Z51, or Grand Sport?  Then look no further because the next big thing is here from Magnuson!...
Kit
Calibration/Warranty
Upper Pulley

Looking for a nice boost in HP from your 2014+ C7 Corvette Stingray, Z51, or Grand Sport?  Then look no further because the next big thing is here from Magnuson!  

Options:
  • C7 LT1 Wet Sump kit with Calibration and 3 year/36K warranty
  • C7 LT1 Wet Sump kit with no Calibration or warranty
  • C7 LT1 Dry Sump kit with no Calibration or warranty
  • 2.30" Upper Pulley for more boost



Magnuson is proud to announce our brand new under the hood HeartBeat supercharger system for the Chevrolet Corvette C7. We ran back-to-back tests with our original TVS 2300 modular supercharger, and the competition's TVS 2300 underhood supercharger. With the provided tune and pulleys, Heartbeat made 25 more horsepower at the wheels than our modular kit, and a whopping 46 more horsepower at the wheels than the competition's underhood system. Tested by two of the most respected engine builders in the industry, Lingenfelter Performance Engineering and Duttweiler Performance, Heartbeat made over 900 HP at a mere 10-11 psi, a credit to it's unsurpassed airflow and inlet design.

Run cooler with the most advanced intercooler system available

Heat soak can be a problem in underhood supercharger systems, robbing more than half the power gain in the summer heat or after a few dragstrip runs. Heartbeat features integrated intercoolers derived from the same technology used in Formula 1 heat exchangers. Unlike other underhood supercharger systems, customers reportlow IATs and consistent performance all day long.

Bolt on 120+ HP in a day

Magnuson Products supercharger kits are complete with all the components necessary for installation, and Heartbeat fits under the factory hood. Included in the kit is our brand new “HeartBeat” cast aluminum intake manifold, factory ‘push-lock’ connectors are utilized in the fuel system for installation ease, Twin dual-pass charge-air-coolers use Formula-1 racing thermal-control technology, coolant circulation pump, heat exchanger and all necessary hardware to make a complete installation package. 

What our customers are saying

"The new under hood Magnuson Heartbeat supercharger is engineering excellence. The placement of the intercoolers and runner design nets maximum efficiency. This unit is far superior to ANY under hood, positive displacement supercharger currently on the market". 

- Steve E

Fitment


  • 2014+ Corvette Stingray

Features


  • TVS2300 Heartbeat Hybrid-roots supercharger
  • Clears the factory Corvette hood and requires no body modifications (requires removal of the hood liner, or maintain the factory hood liner)
  • Weighs 17 pounds less than the standard TVS 2300
  • TVS2300 Front-Inlet Front-Drive rotors, utilizes the same Eaton technology as the Corvette ZR1 LS9
  • Provides cooler discharge temperatures than comparable twin-screw systems
  • Advanced high-flow inlet forward design
  • Includes Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
  • Acoustically designed to minimize noise, vibration, and harshness (NVH)
  • Better air-handling characteristics than comparable superchargers
  • 100% complete bolt-on system which can be installed in one day
  • More power in a smaller package
  • Internal Bypass Valve virtually eliminates parasitic loss (uses less than 1/3 of a horsepower at 60 mph)
  • Delivers a proven increase in real world "under the curve" power
  • High thermal efficiency
  • 2.4 pressure ratio capability
  • High helix four-lobe rotors with 160 degrees of twist
  • Redesigned inlet and outlet ports
  • Utilizes all factory "push-lock" connectors
  • Displacement on demand hardware retained for improved fuel economy
  • Components have been independently tested to GM’s specification

Intercooler System 


  • Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
  • Back-to-back testing verifies the intercooler system is superior
  • Quick-connect fittings for easier installation

Upgrade Options 


  • Upgradable throttle body adaptor available for large throttle bodies
  • Drive pulley options available for high-boost applications

Included Components


  • 6th Generation MP2300 TVS Heartbeat Supercharger with integral bypass valve
  • Patented cast-aluminum high-velocity-port intake manifold
  • Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
  • 8 high-flow fuel injectors
  • GM LS9 fuel rail system
  • Padded Box and UPS 2-Day shipping label for computer return
  • Large front-mounted heat exchanger
  • All necessary fittings, lines, belts, and hardware required

Warranty


  • Standard 3-year/36,000 mile Warranty on the supercharger hardware
  • Standard 1-year Limited Warranty on electronics
  • Optional 3-year/36,000 mile, 5-year/60,000 mile or 5-year/100,000 mile Powertrain Warranty (additional cost)

Maintenance


  • Only requires an oil change every 80,000-120,000 miles

Emissions Status


  • CARB certified
  • 50 State legal

Tools Required


  • Metric wrench set
  • 1/4in. - 3/8in. and 1/2in. drive metric socket set (Standard andamp; Deep)
  • 3/8in.and 1/2in. drive foot-pound and inch-pound torque wrenches
  • Belt tensioner wrench
  • Phillips and flat-head screwdrivers
  • 1/2in. breaker bar
  • Fuel line quick disconnect tool (included in kit)
  • Small or angled 3/8in. drill
  • Drain pan
  • Hose cutters
  • Hose clamp pliers
  • Safety glasses
  • Torque angle meter
  • Hammer
  • Compressed air
  • Blow gun air tool
  • Metric Allen socket set 3/8in. drive
  • Shop vacuum cleaner
  • Blue Loctite
  • Right Angle drill for pinning crank pulley (when required)
  • Helpful Tool: Air or electric impact wrench

Average Installation Time


  • 10-12 Hours

Size and Weight


  • Number of Boxes: 2
  • Box 1 Size: 34"x20"x16"
  • Box 1 Weight: 85 lbs.
  • Box 2 Size: 27"x14"x18"
  • Box 2 Weight: 40 lbs.

 

DISCONTINUED NO LONGER MADE 

Related Products

Scroll To Top