Magnuson: Heartbeat 2300 Supercharger [C7 Corvette Z06, Z07, LT4]

Vendor: Magnuson

SKU: 01-23-62-174-TI

$4,995.00
The most powerful underhood Corvette Z06 LT4 Supercharger on the marketMagnuson is proud to announce our under the hood Heartbeat supercharger system is now available for the 2015-2017 Chevrolet Corvette...
Upper Pulley
Beauty Cover
WEAPON-X Heat Exchanger

The most powerful underhood Corvette Z06 LT4 Supercharger on the market
Magnuson is proud to announce our under the hood Heartbeat supercharger system is now available for the 2015-2017 Chevrolet Corvette C7 Z06. Running at 12 psi, the Heartbeat can add over 80+ hp to the wheels, to give you over 629 rwhp. The new Heartbeat for the C7 Corvette Z06 fits completely underhood, requiring no spacers, and allowing you to keep your Stingray hoodliner. There is also no need to remove your front fascia, as out system connects to all your factory coolant lines.

Run cooler with the most advanced intercooler system available 
Heat soak can be a problem in underhood supercharger systems, robbing more than half the power gain in the summer heat or after a few dragstrip runs. Heartbeat features integrated intercoolers derived from the same technology used in Formula 1 and NASCAR heat exchangers. Unlike other underhood supercharger systems, customers report low IATs and consistent performance all day long.

What our customers are saying

"The new under hood Magnuson Heartbeat supercharger is engineering excellence. The placement of the intercoolers and runner design nets maximum efficiency. This unit is far superior to ANY under hood, positive displacement supercharger currently on the market". - Steve E, Owner of Davenport Motorsports
Features

  • TVS2300 Heartbeat Hybrid-roots supercharger
  • Clears the factory Corvette hood and requires no body modifications
  • TVS2300 Front-Inlet Front-Drive rotors, utilizes the same Eaton technology as the Corvette ZR1 LS9
  • Provides cooler discharge temperatures than comparable twin-screw systems
  • Advanced high-flow inlet forward design
  • Includes Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
  • Acoustically designed to minimize noise, vibration, and harshness (NVH)
  • Better air-handling characteristics than comparable superchargers
  • 100% complete bolt-on system which can be installed in one day
  • More power in a smaller package
  • Internal Bypass Valve virtually eliminates parasitic loss (uses less than 1/3 of a horsepower at 60 mph)
  • Delivers a proven increase in real world "under the curve" power
  • High thermal efficiency
  • 2.4 pressure ratio capability
  • High helix four-lobe rotors with 160 degrees of twist
  • Redesigned inlet and outlet ports
  • Utilizes all factory "push-lock" connectors
  • Displacement on demand hardware retained for improved fuel economy
  • Components have been independently tested to GM’s specification

Intercooler System


  • Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
  • Back-to-back testing verifies the intercooler system is superior
  • Quick-connect fittings for easier installation

Upgrade Options


  • Upgradable throttle body adaptor available for large throttle bodies
  • Drive pulley options available for high-boost applications

Included Components


  • 6th Generation TVS2300 Heartbeat Supercharger with integral bypass valve
  • Patented cast-aluminum high-velocity-port intake manifold
  • Twin dual-pass charge-air-coolers utilise Formula-1 racing thermal-control technology
  • Large front-mounted heat exchanger
  • All necessary fittings, lines, belts, and hardware required

Warranty


  • Standard 3-year/36,000 mile Warranty on the supercharger hardware
  • Standard 1-year Limited Warranty on electronics
  • Standard Power Train - 3 Year / 36,000 Mile Limited Power Train Warranty
  • Optional Power Train - 5 Year / 60,000 Mile Limited Power Train Warranty

Maintenance


  • Sealed supercharger rotor assembly requires no maintenance or oil change

Emissions Status


  • N/A

Tools Required


  • Metric wrench set
  • 1/4in. - 3/8in. and 1/2in. drive metric socket set (Standard and Deep)
  • 3/8in.and 1/2in. drive foot-pound and inch-pound torque wrenches
  • Belt tensioner wrench
  • Phillips and flat-head screwdrivers
  • 1/2in. breaker bar
  • Fuel line quick disconnect tool (included in kit)
  • Small or angled 3/8in. drill
  • Drain pan
  • Hose cutters
  • Hose clamp pliers
  • Safety glasses
  • Torque angle meter
  • Hammer
  • Compressed air
  • Blow gun air tool
  • Metric Allen socket set 3/8in. drive
  • Shop vacuum cleaner
  • Blue Loctite
  • Right Angle drill for pinning crank pulley (when required)
  • Helpful Tool: Air or electric impact wrench

Average Installation Time


  • 10-12 Hours

Size and Weight


  • Number of Boxes: 2
  • Box 1 Size: 34"x20"x16"
  • Box 1 Weight: 85 lbs.

    Related Products