Edelbrock Pro-Flo 4 EFI Traditional 4150-Style #35650 1970-91 AMC 304,360,390,401 W/Tablet

Vendor: Edelbrock

SKU: 35650

$2,195.95
DETAILS Edelbrock Pro-Flo 4 EFI System #35650 is an advanced sequential-port EFI system for 1970-1991 AMC 304, 360, 390, 401 CID engines. This EFI kit a multi-port design with an...
Title

DETAILS

Edelbrock Pro-Flo 4 EFI System #35650 is an advanced sequential-port EFI system for 1970-1991 AMC 304, 360, 390, 401 CID engines. This EFI kit a multi-port design with an injector at the end of each runner on the manifold to deliver the best fuel atomization with even distribution to the combustion chambers. The Pro-Flo 4 EFI for AMC features our high-performance Victor Jr.-style single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. This kit is compatible with factory-style cylinder heads or Edelbrock Performer and Performer RPM Cylinder heads. Includes a distributor designed to work specifically with Pro-Flo 4 providing sequential port injection and infinite control over ignition and fuel events. This system is rated for 550 horsepower at 58 PSI with all supporting sensors, ECU, wire harnesses and 7-inch Android tablet for streamlined installation. Calibration of the Pro-Flo 4 is a simple process with a Setup Wizard providing guidance through the E-Tuner's initial programming. Once provided with basic information such as type of engine, cubic inches, firing order, and cam profile, the E-Tuner then selects the most appropriate base calibration. Once the base calibration is set, the self-learning E-Tuner takes over to continually maximize the fuel map according to the way you drive your vehicle, even compensating for changes in altitude and weather. The E-Tuner provides more advanced tuning options that allow precise control over cold starts and acceleration while retaining the simplicity that Pro-Flo systems are known for.




SPECS

Availability Available
Application Application Specific
UPC 00085347356508
Gasket Or Seal Included Yes
Quantity Kit
Wiring Harness Included Yes
System Type Traditional 4150-Style Kit
Distributor Cap Included Yes
Bore Diameter 1.75 in
Availability Note Available to Order
Warranty 24 Months
Fuel Injector Type 35 lb/hr
Maximum Horsepower 500 @ 43 psi/550 @ 58 psi
Idle Air Control Motor Included Yes
Fuel Pressure Port 1/8-27 NPT
Emissions Code

 

Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • This Pro-Flo 4 system for 1970-1991 AMC 304, 360, 390, 401 c.i engines requires a high-pressure, EFI-compatible fuel delivery system. Edelbrock fuel delivery kits are available and sold separately for this application. Includes standard oil fill and raised PCV boss and baffle for better oil control. PCV and Baffle included in kit. Visit edelbrock.com to choose the right kit for your installation.
  • Manifolds height for Pro-Flo 4 #35650 is 5.74 inches, Carb Angle 0 degrees.
Finish Satin

Related Products