WEAPON-X: Griptec Pulley [CTS V gen 2, Camaro ZL1 gen 5, LSA]
Vendor: WEAPON-X Motorsports
The WEAPON-X Griptec pulleys are the new latest and greatest in pulley technology for your gen 2 CTS-V and gen 5 ZL1. The WEAPON-X versions are spec'ed out based on the 1.9L supercharger's capabilities in our proprietary sizes Pick your poison, but if you need help, call our supercharger specialists and we can make sure you're running the best combo for your setup!
* Anything smaller than 2.4" requires snout milling/clearance. We offer fully ported snouts and superchargers with in-house CNC milled snouts with your choice of pulleys pressed and pinned. Contact email@example.com for additional info.
GripTec® Micro is a micro ablation machining process. Our micro machining capabilities are near limitless and we apply our technology to give the target component an engineered surface design that optimizes the safest most aggressive gripping force possible. Our multi directional machined ridges and valleys offer up more than just maximum gripping force they also act as escape ducts for trapped air and debris further helping in the mating of the target surface and belt. US Patent 9,421,637
Belt slip is a very common issue on supercharged components. In fact some units cranking out as much as 14-16 psi can take up to 200hp to drive. Often the drive systems are plagued with slippage issues and builders find themselves moving to noisy cog systems, where belts have shorter life spans, are difficult to find at just any parts store and they can create more heat through the frictional movement of the cogs.
Belt slip isn't always noticeable. Often belt slip is noticed when the system squeals, squeaks or boost falls off. Did you know that naturally the belt can slip a very small percentage even on NA vehicles, one major factor to belts wearing. Belt wrap does play a key factor in minimizing belt movement but when it comes to driving a supercharger is hard to fully eliminate with just surface contact. Systems running 3.4 upper pulleys can see as much as a 1.5 psi gain when matching size for size pulleys.
Whether you are running 6 psi or 20+ psi you are slipping if you are not running GripTec®
Pro's to using GripTec®
Increased boost and supercharger performance size for size pulley
Reduce or eliminate belt slippage on the applied component
Increase belt life from not slipping over and over again
Eliminate belt squeaks common when shifting hard
To much boost for current engine tune. Adjustment may be required.