Edelbrock Stage 2 Supercharger 2010-13 Corvette Grand Sport LS3-Dry Sump w/ Tune
Vendor: Edelbrock
SKU: 1575
More info
DETAILS
The Edelbrock supercharger stage 2 street/strip system part #1575 is for use with 2010-13 Chevy Corvette Grand Sports with Dry Sump increases the performance of your LS3 engine to 599 horsepower and 547 ft-lbs of torque at the flywheel. The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with 160 degrees of twist for maximum flow, minimum temperature rise and quiet operation for excellent drivability. We also designed our superchargers with an integrated bypass valve to help eliminate parasitic loss under light throttle, improving mileage potential. Our unique and efficient inlet configuration results in a shorter, less restrictive intake path for improved airflow, without the need for a jack-shaft. Keeping the air cool is a high-capacity air-to-water intercooler and low-temp heat exchanger. The Edelbrock #1575 system is 50-state emissions legal. The supplied tune is intended for completely stock vehicles with the exception of a cat-back exhaust.
SPECS
Availability | Available |
---|---|
Application | Application Specific |
UPC | 00085347015757 |
System Type | Stage 2 - Street/Strip System |
Vehicle Model | Corvette |
Grade Type | Performance |
Housing Material | Cast Aluminum |
Gasket Or Seal Included | Yes |
Quantity | Kit |
Oil Capacity | 150 mL |
Center Housing Cooling Type | Intercooler |
Internal Step Up | Yes |
Mounting Bracket Included | Yes |
Outside Pulley Diameter | 3.5 in |
CARB Executive Order Number | D-215-89 |
Maximum Torque | 547 ft-lb |
Fuel Injector Type | 52 lb/hr |
Maximum Horsepower | 599 |
Availability Note | Available to Order |
Warranty | 36 Months |
Emissions Code |
|
Hazardous Materials Warning | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
Installation Notes |
|
Finish | Black Powder Coated |
Inside Diameter | 1.251 in |
Maximum Boost Pressure | 7.5 PSI |
Outside Diameter | 3.875 in |
Pulley Belt Width | 6-Rib |
Universal Or Specific Fit | Specific |