JMS: PowerMAX V2 FuelMax [Camaro Corvette CTS V, LS LT]

← Previous Product Next Product →

Vendor: JMS Chip

SKU: P2000GMP

$409.00

Need to get a little more out of your tank fuel pumps but aren't ready to upgrade the pumps yet? JMS has that boost you need! PowerMAX v2 • FuelMAX...

Yes

Quantity

Subtotal:

Need to get a little more out of your tank fuel pumps but aren't ready to upgrade the pumps yet? JMS has that boost you need!

PowerMAX v2 • FuelMAX 22 Volt/44 AMP • Universal Splice-In Voltage Booster
GM Version
Increase the output of ANY fuel pump by up to 85%!!

Why replace your fuel pump when you can reliably increase it's output with PowerMAX?

Use PowerMAX v2 to quickly and easily increase your stock fuel pumps output!
PowerMAX Version 2 upgrades include: New Case, Higher Output & More Features!
P2000GMP2 is used on vehciles with constant power applied to the fuel pump driver module. Support over 800hp on your GM with the stock pump!

Simple installation: PowerMAX splices into your existing fuel pump +12V DC feed wire. Designed to activate via the accelerator pedal position sensor. Compatible with all 12V or 16V battery systems.

High Quality User Adjustable Hobbs Switch: Preset @ 5psi, User Adjustable from 3psi to 7psi
Adjustable Voltage Ramp In / Ramp Out • Choose a Time Ramp or from a monitored 0-5v sensor: Eliminate fuel pressure spikes!! Green Status LED: Know at a glance what the unit is doing. Blinking LED = Boosting Voltage

Each PowerMAX v2 Kit Contains: 44 Amp PowerMAX V2 Voltage Booster, Wiring Harness, Installation Kit, Set of Instructions

Installation Kit Contains: 1 - Accelerator Pedal Activation Harness, 1 - Hobbs Switch Preset @ 5psi (user adjustable 3-7psi), 1 - Fitting 1/8npt Female to 3/16" Male Barb, 1 - Vacuum Tee 3/16" x 3/16" x 3/16", 1 - Vacuum Tee 1/4" x 1/4" x 3/16", 1 - Vacuum Tee 3/8" x 3/8" x 3/16", 1 Foot of 5/32" vacuum hose, 1 - 30amp mini-fuse, solder, 2 - 10/12gauge Heat Shrink Butt Splices, 2 - #8 stud 18/22 gauge wire Heat Shrink Ring Terminal, 1 - 10 gauge Heat Shrink Ring Terminal, 6 - Zip Ties, 6 - Self drilling hex screws, mini screw-driver
Download the Product Installation Instructions
Download the Product Technical Information Sheet

Optional: Remote Mounted Voltage Control Knob (Approximately 1" x 1" x 1") Part Number: P2999 Over-Rides and adjusts the output voltage when the device is boosting voltage.