Fore: Fuel System [CTS V gen 2, LSA]

Tired of the limitations of the stock CTS V fuel system?  Whether running over 700rwhp on 93 or e85, this is your solution to a true return fuel system capable of supporting 800-1200 rwhp.  Multiple setup options on return lines.

Level 1:
Boost Referenced Return System for 800+ rwhp. Use with OEM fuel rails.

INCLUDES:
CTS-V Fuel Pump Module (dual or triple Ti 285 pumps)
F1i Fuel Pressure Regulator
FC3 Controller - Staged
Honeywell pressure switch
128mm Inline Fuel Filter - Stainless Steel 
FCV Checkvalve
All fittings, hose, hardware required for typical fuel line plumbing
-30 feet of fuel line PTFE -8
-10 billet compression style hose ends
-Qty 4, billet low profile 90 degree AN to o-ring fittings
-Qty 3, billlet straight AN to o-ring fittings
-Qty 1, 3/8 EFI male to AN-8 male adapter
-Qty 10, hose straps with stainless mounting screws
____________________________________________________________________

Level 2:
1200+ rwhp capable return fuel system with efficient hose routing. The rails are in a series installation with the fuel pressure regulator AFTER customer supplied or selected Fore rails. We recommend this setup for centrifugal and turbo setups.

INCLUDES
CTS-V Fuel Pump Module (dual or triple Ti 285 pumps)
128mm Inline Fuel Filter - Stainless Steel
F2i Fuel Pressure Regulator
FC3 Controller - Staged
Honeywell Pressure Switch
FCV Checkvalve
All fittings, hose, and hardware necessary to complete typical fuel line plumbing
-30 feet of PTFE -8 fuel line
-Qty 10, billet compression style hose ends
-Qty 7 billet low profile 90 degree AN to o-ring fittings
-Qty 3 billet straight AN to o-ring fittings
-Qty 1, billet o-ring plug
-Qty 1, billet 1/8 NPT plug
-Qty 10, hose straps with stainless mounting screws
____________________________________________________________________

Level 3:
1200+ rwhp capable return fuel system made with top shelf components. The feed line enters our F4i regulator, then distribution lines feed to the rear of both customer supplied or select Fore fuel rails.

INCLUDES
CTS-V Fuel Pump Module (dual or triple Ti 285 pumps)
F4i Fuel Pressure Regulator
FC3 Controller - Staged
Honeywell Pressure Switch
128mm Inline Fuel Filter - Stainless Steel 
FCV Checkvalve
All fittings, hose, and hardware necessary to complete typical fuel line plumbing
-30 feet of PTFE fuel line (-10 feed, -8 return)
-Qty 10, billet compression style hose ends
-Qty 7, billet low profile 90 degree AN to o-ring fittings
-Qty 3, billet straight AN to o-ring fittings
-Qty 3, billet o-ring plugs
-Qty 10, hose straps with stainless mounting screws
-Qty 1, 1/8 NPT plug
____________________________________________________________________

Level 4:
Boost Referenced Return System for 1200+ rwhp. Feed line is split with y-block to enter rear of rails. Regulator is mounted after customer supplied rails or select Fore rails. Return line back to tank.

INCLUDES
CTS-V Fuel Pump Module (dual Ti 285 pumps)
2-1 Y-block
F2i Fuel Pressure Regulator
FC3 Controller - Staged
Honeywell Pressure Switch
128mm Inline Fuel Filter
FCV Checkvalve
All fittings, hose, and hardware required for typical fuel line plumbing
-30 feet of PTFE fuel line (-10 feed/-8 return)
-Qty 14, compression style billet hose ends
-Qty 8, billet low profile 90 degree AN to o-ring fittings
-Qty 6, straight AN to o-ring fittings
-Qty 10, hose straps with stainless mounting screws
-Qty 1, 1/8 NPT plug