Callies: Compstar Connecting Rods

Vendor: Callies

SKU: CSC6125DS2A2AH

$795.00 $849.00
Better by Design Designed and produced with engineering and finishing advancements, CompStar high performance connecting rods have what it takes to make your engine build trouble free and your finished...
Title

Better by Design

Designed and produced with engineering and finishing advancements, CompStar high performance connecting rods have what it takes to make your engine build trouble free and your finished product reliable. Every detail of this highly-stressed component has been carefully analyzed to maximize repeatability and dependability.

Based on feedback from a variety of highly regarded professional engine builders, Compstar engineers set out to address the most common issues associated with many aftermarket connecting rods.

Big End Bore Sizing

Out of round, and repeatability are certainly a major concern for all engine builders. Many connecting rods are dimensionally well within industry standards out of the box, but after disassembly and reassembly become out of round. Compstar rods maintain dimensional repeatability through use of a lengthy stress relief process, and multiple re-torque processing. The combination of the release of residual machining stresses and burnishing of threads and bolt spot faces ensures that big end bores stay round regardless of how many times your rods are disassembled and reassembled.

Preparation Time

Properly detailing connecting rods in preparation for use is a time consuming task. Compstar connecting rods have the most common prep work already done. Pin bushings are chamfered and honed for proper high performance oil clearance. Parting line edges are generously chamfered to resist scraping during insertion of the bearing shells. The bearing locating tab slots are de-burred to ensure the bearing tab is fully seated for trouble free installation.

No Costly Upgrades

Compstar rods were designed with higher horsepower stroker motors in mind from the start, not as an afterthought. Bolt upgrades and stroker clearance are normally additional cost options with other rods, but are standard equipment with Compstar rods.

ARP 2000 bolts are used exclusively for superior tensile strength and clamping force at the critical mating joint of the rod and cap. The placement of these bolts is also key to additional rotational clearance in stroker applications at the bottom of the bores and at the pan rails.

Strengthening gussets are also added to the bolt spot-face area of the cap where cross sectional thickness is at a minimum. These gussets not only increase strength, but aid in dimensional stability as well.

Contouring above the bolts increase cam clearance and decrease the amount of clearance required at the bottom of the bores on the cam side. Compstar rods will clear a .660‰Û_ lift cam on a .900‰Û_ base circle with a 4.000‰Û_ stroke crank without any modification to the rod.

The increasingly popular Forged Side Relief style pistons move the pin bosses inward, normally requiring narrowing of the pin end of the connecting rod. Compstar rods are designed and manufactured with a .960‰Û_ pin end width, and will work with all currently available FSR style pistons without modification.

Reduced Weight

The Compstar engineering staff has worked very hard at reducing weight without sacrificing strength and durability. 3D solid modeling software has enabled us to refine our design while monitoring predicted weight, resulting in a very high strength to weight ratio.

åÊ

Big Block H-Beam
With ARP L-19 Bolt
åÊåÊåÊåÊåÊDescription Typical wt Part #
6.135 / 2.200 813g CSB6135ES3B9AH
6.385 / 2.100 732g CSB6385DS3B4AH
6.385 / 2.200 816g CSB6385ES3B9AH
6.535 / 2.200 820g CSB6535ES3B9AH
6.660 / 2.200 805g CSB6660ES3B9AH
6.700 / 2.200 825g CSB6700ES3B9AH
6.800 / 2.200 842g CSB6800ES3B9AH
Small Block H-Beam
åÊåÊåÊåÊåÊDescription Typical wt Part #
5.700 / 2.000 581g CSA5700CS2A2AH
5.700 / 2.100 603g CSA5700DS2A2AH
5.850 / 2.000 587g CSA5850CS2A2AH
5.850 / 2.100 609g CSA5850DS2A2AH
6.000 / 1.888 525g CSA6000AS2A0AH
6.000 / 2.000 591g CSA6000CS2A2AH
6.000 / 2.100 612g CSA6000DS2A2AH
6.125 / 2.000 596g CSA6125CS2A2AH
6.125 / 2.100 617g CSA6125DS2A2AH
6.200 / 2.000 598g CSA6200CS2A2AH
6.200 / 2.100 615g CSA6200DS2A2AH
6.250 / 2.100 619g CSA6250DS2A2AH
6.300 / 2.100 626g CSA6300DS2A2AH
Small Block Ford
åÊåÊåÊåÊåÊDescription Typical wt Part #
5.400 / 2.123 571g CSF5400HS2F2AH
LSx
åÊåÊåÊåÊåÊDescription Typical wt Part #
6.100 / 2.100 611g CSC6100DS2A2AH
6.100 / 2.100 612g CSC6100DS6A2AH .943 Pin
6.125 / 2.000 595g CSC6125CS2A2AH
6.125 / 2.100 618g CSC6125DS2A2AH
6.200 / 2.100 625g CSC6200DS2A2AH
6.340 / 2.000 630g CSC6340CS2A2AH
6.440 / 2.000 639g CSC6440CS2A2AH
6.460 / 2.100 647g CSC6460DS2A2AH
6.560 / 2.100 655g CSC6560DS2A2AH
BB Mopar
åÊåÊåÊåÊåÊDescription Typical wt Part #
6.760 / 2.500 872g CSE6760FS3D5AH
Viper V-10
åÊåÊåÊåÊåÊDescription Typical wt Part #
6.250 / 2.125 628g CSD6250GS2E1AH

åÊ

Related Products

Scroll To Top