WEAPON-X: Procharger Griptec Pulley [Camaro6, Corvette C7, LT1 LT4]
Vendor: WEAPON-X Motorsports
SKU:
More info
The WEAPON-X Griptec pulleys are the new latest and greatest in pulley technology for your LT1 LT4 Procharged powered Camaro or Corvette! The WEAPON-X versions are spec'ed out based on the P1, D1, and F1 supercharger capabilities in our proprietary sizes. Pick your poison, but if you need help, call our supercharger specialists and we can make sure you're running the best combo for your setup! Need a custom size? Email sales@weapon-x.com
GripTec® Micro is a micro ablation machining process. Our micro machining capabilities are near limitless and we apply our technology to give the target component an engineered surface design that optimizes the safest most aggressive gripping force possible. Our multi directional machined ridges and valleys offer up more than just maximum gripping force they also act as escape ducts for trapped air and debris further helping in the mating of the target surface and belt. US Patent 9,421,637
Belt slip is a very common issue on supercharged components. In fact some units cranking out as much as 14-16 psi can take up to 200hp to drive. Often the drive systems are plagued with slippage issues and builders find themselves moving to noisy cog systems, where belts have shorter life spans, are difficult to find at just any parts store and they can create more heat through the frictional movement of the cogs.
Belt slip isn't always noticeable. Often belt slip is noticed when the system squeals, squeaks or boost falls off. Did you know that naturally the belt can slip a very small percentage even on NA vehicles, one major factor to belts wearing. Belt wrap does play a key factor in minimizing belt movement but when it comes to driving a supercharger is hard to fully eliminate with just surface contact. Systems running 3.4 upper pulleys can see as much as a 1.5 psi gain when matching size for size pulleys.
Whether you are running 6 psi or 30+ psi you are slipping if you are not running GripTec®
Pro's to using GripTec®
Increased boost and supercharger performance size for size pulley
Reduce or eliminate belt slippage on the applied component
Increase belt life from not slipping over and over again
Eliminate belt squeaks common when shifting hard
Con's
To much boost for current engine tune. Adjustment may be required.
GripTec® Micro is a micro ablation machining process. Our micro machining capabilities are near limitless and we apply our technology to give the target component an engineered surface design that optimizes the safest most aggressive gripping force possible. Our multi directional machined ridges and valleys offer up more than just maximum gripping force they also act as escape ducts for trapped air and debris further helping in the mating of the target surface and belt. US Patent 9,421,637
Belt slip is a very common issue on supercharged components. In fact some units cranking out as much as 14-16 psi can take up to 200hp to drive. Often the drive systems are plagued with slippage issues and builders find themselves moving to noisy cog systems, where belts have shorter life spans, are difficult to find at just any parts store and they can create more heat through the frictional movement of the cogs.
Belt slip isn't always noticeable. Often belt slip is noticed when the system squeals, squeaks or boost falls off. Did you know that naturally the belt can slip a very small percentage even on NA vehicles, one major factor to belts wearing. Belt wrap does play a key factor in minimizing belt movement but when it comes to driving a supercharger is hard to fully eliminate with just surface contact. Systems running 3.4 upper pulleys can see as much as a 1.5 psi gain when matching size for size pulleys.
Whether you are running 6 psi or 30+ psi you are slipping if you are not running GripTec®
Pro's to using GripTec®
Increased boost and supercharger performance size for size pulley
Reduce or eliminate belt slippage on the applied component
Increase belt life from not slipping over and over again
Eliminate belt squeaks common when shifting hard
Con's
To much boost for current engine tune. Adjustment may be required.
Related Products
WEAPON-X: Procharger Griptec Pulley [Camaro6, Corvette C7, LT1 LT4]
$249.00
$299.00
The WEAPON-X Griptec pulleys are the new latest and greatest in pulley technology for your LT1 LT4 Procharged powered Camaro...
WEAPON-X: LT Billet Valve Covers [Camaro Corvette CTS V, LT1 LT4 LT5]
$849.00
$949.00
Valve Covers are one of the most overlooked upgrades on the modern LT engine and this solution will add both...
WEAPON-X: LT4 Supercharger Conversion [C7 Corvette, Camaro gen 6]
$4,499.00
We are now offering LT4 supercharger conversion kits for the C7 Corvette and Camaro SS LT1 platforms! If you have an...
WEAPON-X: Stealth Trunk Cooler Kit [Camaro SS ZL1 gen 6, CTS V, LT1 LT4]
$899.00
$989.00
Unless you're new to the late model GM cooling game, you already know that the WEAPON-X is the most highly regarded name in the...
WEAPON-X: 370cfm LT1 4.065" Ported Cylinder Heads [Camaro Corvette, LT1]
$1,999.00
$2,199.00
The 2014+ C7 Corvette Stingray, 2017+ C7 Corvette Grand Sport, and 2016+ 6th gen Camaro SS out of the box...
WEAPON-X SPI Kit: Secondary Port Injection [Camaro, Corvette, CTS V, LT1 LT4]
$6,299.00
$6,999.00
WEAPON-X Secondary Port Injection KitThe solution for big power needs is our secondary port injection and this is the same...
WEAPON-X: Naturally Aspriated Camshaft Kit [Camaro SS, 1LE, gen 6, LT1]
$1,099.00
$1,299.00
Looking to make more efficient naturally aspirated power and more aggressive lope (increasing by stages below) in your gen 6 Chevrolet Camaro...
WEAPON-X: Whipple "Whiplash" Camshaft Kit [Camaro SS, 1LE, gen 6, LT1]
$949.00
$999.00
Running the 2.9L Whipple supercharger and need the perfect cam for more power and a nice aggressive lope on the stock converter in...
WEAPON-X: Procharger F1 "Twister" Camshaft Kit [Camaro SS, 1LE, gen 6, LT1]
$949.00
$999.00
When 3 digit power is child's play, you turn to the Procharger F1A-94 or F1-X Kits and you and need...
WEAPON-X: Centri Supercharger Camshaft Kit [Camaro SS, 1LE, gen 6, LT1]
$1,199.00
$1,299.00
Looking to make more efficient centrifugal supercharged power and more aggressive lope (increasing by stages below) in your Chevrolet Camaro ZL1 gen 6,...
WEAPON-X: PD Supercharger Camshaft Kit [Camaro SS, 1LE, gen 6, LT1]
$1,199.00
$1,299.00
Looking to make more efficient positive displacement supercharged power and more aggressive lope (increasing by stages below) in your Chevrolet Camaro SS, 1LE, gen...
GM: ZL1 1LE Carbon Fiber Spoiler [Camaro gen 6 SS 1LE ZL1, LT1 LT4]
$4,449.00
$6,697.00
Personalize your Camaro with this 2018 OEM Carbon Fiber Spoiler found on the ZL1 1LE Model. This uses the same...
WEAPON-X: Parachute Kit [Camaro gen 6 SS ZL1, CTS V gen 3, LT1 LT4]
$1,199.00
Parachute mount for alpha platform car including the Camaro gen 6 SS, 1LE, ZL1, ZL1 1LE, Cadillac ATS V and...
WEAPON-X: LT1 LT4 LT5 Forged Short Block 378 to 454 Cubic Inch (Optional Sleeving)
$5,699.00
$6,499.00
Here's your chance to drop in one of the race prepped engines we use on our builds at WEAPON-X Motorsports! ...
WEAPON-X: 15" Drag Kit [Camaro SS 1LE ZL1, LT1 LT4]
$1,499.00
Are you ready to hit the drag strip with our WEAPON-X 15" Kit?! Yea, sure we've cut 1.4Xs on the...
WEAPON-X: 405cfm LT1X 4.125" Big Valve Cylinder Heads [C7 Corvette, Camaro SS, LT1]
$3,299.00
$3,499.00
The 2014+ C7 Corvette Stingray, 2017+ C7 Corvette Grand Sport, and 2016+ 6th gen Camaro SS out of the box...
WEAPON-X: Gift Card - "WEAPON-X BUCKS"
$50.00
Shopping for someone else but not sure what to give them? Give them the gift of choice with a "WEAPON-X...
WEAPON-X: LT5 95mm Ported Throttle Body [Camaro Corvette CTS V]
$180.00
$200.00
The WEAPON-X ported throttle bodies are quickly becoming notorious for quality, improved driveability, and power! The 95mm LT5 throttle body...
GM: LT5 Throttle Body with Adapter [Camaro Corvette CTS V, LT1 LT4 LT5]
$250.00
$299.00
The 95mm LT5 throttle body is GM's new choice for their highest HP production car ever and this can be...
WEAPON-X: ZLX Wing ZL1 1LE Style - Carbon Fiber [Camaro gen 6]
$1,935.00
$2,150.00
Do you love the look of the ZL1 1LE high wing? We've released two version of the ZL1 1LE style wing, one...
WEAPON-X: Whipple LT1 LT4 Cooling Adapters [Camaro Corvette CTS V, LT]
$299.70
$330.00
These billet adapters are a direct replacement! Whipple’s gen 6 Camaro SS and 1LE, our C7 Corvette LT1 and Camaro...
ProCharger: 2017-21 CHEVROLET CAMARO ZL1 (LT4) -- Stage II Intercooled Tuner Kit with D-1SC
$8,499.00
Thanks to the super-efficient boost and power created by the ProCharger centrifugal design, with a larger supercharger head unit you...
ProCharger: 2016-2021 CHEVROLET CAMARO SS LT1 -- INTERCOOLED SUPERCHARGER P-1SC-1
$6,549.00
Intercooled System with Factory Airbox and P-1SC-1 only Stage II Intercooler Option for Factory Airbox System P-1SC-1 only ...
ProCharger: 2016-21 CHEVROLET CAMARO SS LT1 -- HO INTERCOOLED SUPERCHARGER P-1SC-1 / P-1X COMPLETE KIT
$6,649.00
ProCharger: 2016-21 CHEVROLET CAMARO SS LT1 -- HO INTERCOOLED SUPERCHARGER P-1SC-1 / P-1X COMPLETE KIT Procharger HO complete kit...
ProCharger: 2016-2021 CHEVROLET CAMARO SS LT1 -- HO INTERCOOLED SUPERCHARGER TUNER KIT
$6,349.00
Procharger HO tuner kit is a direct fit system for the Chevy 2016+ Camaro. With only 7 psi on pump...
ProCharger: 2016-2021 CHEVROLET CAMARO SS LT1 -- SUPERCHARGER STAGE II INTERCOOLED P-1SC-1 / P-1X COMPLETE KIT
$7,899.00
$8,743.00
Procharger Complete Stage 2 kit is a direct fit system for the Chevy 2016+ Camaro. With only 7 psi on...
Procharger: 2016-2021 CHEVROLET CAMARO SS LT1 -- STAGE II INTERCOOLED SUPERCHARGER TUNER KIT
$6,699.00
Procharger Stage 2 Tuner Kit kit is a direct fit system for the Chevy 2016+ Camaro. With only 7 psi...
ProCharger: 2016-2021 CHEVROLET CAMARO SS LT1 -- F1-A, F-1 OR F-1D INTERCOOLED COMPETITION RACE TUNER KIT
$9,949.00
This is an ATI / Procharger Air-to-Water intercooled Competition Race Tuner Kit with F-1D, F-1, F-1A head unit and dedicated...
ProCharger: 2016-2021 CHEVROLET CAMARO SS LT1 -- F1-A-94, F-1C OR F-1R INTERCOOLED COMPETITION RACE TUNER KIT
$10,279.00
This is an ATI / Procharger Vert intercooled Competition Race Tuner Kit with F1-A-94, F-1C or F-1R head unit and...
Edelbrock Stage 1 Supercharger 2016-21 Camaro SS LT1 6.2L All Trans w/o Tune
$8,390.87
DETAILS The Edelbrock Supercharger System W/O TUNER #155950 is a 50-state emissions-legal power adder designed for use with the 2016-21...
Edelbrock Stage 3 Supercharger #15997 For 2010-13 Chevrolet Camaro SS LS7-Wet Sump W/O Tune
$6,841.87
DETAILS The Edelbrock Supercharger Stage 3 Pro-Tuner system part #15997 is designed for use with 2010-2013 LS3 Camaro applications equipped...