WEAPON-X: Procharger Griptec Pulley [Camaro6, Corvette C7, LT1 LT4]
Vendor: WEAPON-X Motorsports
SKU:
More info
The WEAPON-X Griptec pulleys are the new latest and greatest in pulley technology for your LT1 LT4 Procharged powered Camaro or Corvette! The WEAPON-X versions are spec'ed out based on the P1, D1, and F1 supercharger capabilities in our proprietary sizes. Pick your poison, but if you need help, call our supercharger specialists and we can make sure you're running the best combo for your setup! Need a custom size? Email sales@weapon-x.com
GripTec® Micro is a micro ablation machining process. Our micro machining capabilities are near limitless and we apply our technology to give the target component an engineered surface design that optimizes the safest most aggressive gripping force possible. Our multi directional machined ridges and valleys offer up more than just maximum gripping force they also act as escape ducts for trapped air and debris further helping in the mating of the target surface and belt. US Patent 9,421,637
Belt slip is a very common issue on supercharged components. In fact some units cranking out as much as 14-16 psi can take up to 200hp to drive. Often the drive systems are plagued with slippage issues and builders find themselves moving to noisy cog systems, where belts have shorter life spans, are difficult to find at just any parts store and they can create more heat through the frictional movement of the cogs.
Belt slip isn't always noticeable. Often belt slip is noticed when the system squeals, squeaks or boost falls off. Did you know that naturally the belt can slip a very small percentage even on NA vehicles, one major factor to belts wearing. Belt wrap does play a key factor in minimizing belt movement but when it comes to driving a supercharger is hard to fully eliminate with just surface contact. Systems running 3.4 upper pulleys can see as much as a 1.5 psi gain when matching size for size pulleys.
Whether you are running 6 psi or 30+ psi you are slipping if you are not running GripTec®
Pro's to using GripTec®
Increased boost and supercharger performance size for size pulley
Reduce or eliminate belt slippage on the applied component
Increase belt life from not slipping over and over again
Eliminate belt squeaks common when shifting hard
Con's
To much boost for current engine tune. Adjustment may be required.
GripTec® Micro is a micro ablation machining process. Our micro machining capabilities are near limitless and we apply our technology to give the target component an engineered surface design that optimizes the safest most aggressive gripping force possible. Our multi directional machined ridges and valleys offer up more than just maximum gripping force they also act as escape ducts for trapped air and debris further helping in the mating of the target surface and belt. US Patent 9,421,637
Belt slip is a very common issue on supercharged components. In fact some units cranking out as much as 14-16 psi can take up to 200hp to drive. Often the drive systems are plagued with slippage issues and builders find themselves moving to noisy cog systems, where belts have shorter life spans, are difficult to find at just any parts store and they can create more heat through the frictional movement of the cogs.
Belt slip isn't always noticeable. Often belt slip is noticed when the system squeals, squeaks or boost falls off. Did you know that naturally the belt can slip a very small percentage even on NA vehicles, one major factor to belts wearing. Belt wrap does play a key factor in minimizing belt movement but when it comes to driving a supercharger is hard to fully eliminate with just surface contact. Systems running 3.4 upper pulleys can see as much as a 1.5 psi gain when matching size for size pulleys.
Whether you are running 6 psi or 30+ psi you are slipping if you are not running GripTec®
Pro's to using GripTec®
Increased boost and supercharger performance size for size pulley
Reduce or eliminate belt slippage on the applied component
Increase belt life from not slipping over and over again
Eliminate belt squeaks common when shifting hard
Con's
To much boost for current engine tune. Adjustment may be required.
Related Products
WEAPON-X: Griptec Pulley [C7 Corvette Z06, CTS V, Camaro ZL1, LT4]
$199.00
The WEAPON-X Griptec pulleys are the new latest and greatest in pulley technology for your Camaro, Corvette, or CTS V! The...
Metco: Lower Crank Pulley Ring [CTS V, Camaro, LSA LT4]
$115.99
Looking for more boost your your LSA or LT4 Camaro ZL1 or CTS V? Change the ratio the blower spins...
WEAPON-X: 112mm Throttle Body Adapter [LS LT1 LT4]
$72.00
$80.00
Billet Nick Williams 112 Throttle Body Adapter Fits: LS2 LS3 LS6 LS7 LS9 LSA LT1 LT4 Camaro Corvette CTS-V G8...
WEAPON-X: Lower Pulley Kit [CTS V gen 3, Camaro ZL1 gen 6, LT4]
$760.50
$845.00
Looking for more boost your your 2016+ Cadillac CTS-V, 2017+ Camaro ZL1, or 2016+ Camaro SS LT1 with a supercharger? Change the...
WEAPON-X: Billet LT4 Supercharger Lid [Camaro ZL1, Corvette Z06, CTS V]
$899.10
$999.00
The WEAPON❌ Billet LT4 Supercharger Lid replaces the factory supercharger lid on GM LT4 Superchargers for a quick and clean install...
WEAPON-X: LT4 Cooling Manifold Adapters [C7 Corvette Z06, Camaro ZL1, CTS V3, LT4]
$170.00
$189.00
These cooling manifold adapters allow you to remove the front coolant crossover tube so the intercooler bricks can receive flow...
Gates Belt: Pulley Combos [Camaro ZL1 gen 6, CTS V gen 3, LT4]
$45.00
$55.00
Upping your HP by changing your pulley combo, but have no clue what belt you need? Just choose your pulley...
WEAPON-X: SuperFlow1 5" Air Intake - Carbon Fiber [Camaro ZL1 gen 6, LT4]
$449.00
$599.00
The sixth generation Camaro ZL1 leaves very little to be desired in the way of performance coming off the showroom floor. However,...
WEAPON-X SPI Kit: Secondary Port Injection [Camaro, Corvette, CTS V, LT1 LT4]
$6,299.00
$6,999.00
WEAPON-X Secondary Port Injection KitThe solution for big power needs is our secondary port injection and this is the same...
DSX: Baro IAT Breakout Harness Gen V [Camaro, Corvette, CTS V, LT1 LT4 LT5]
$100.00
$199.00
This harness is completely Plug-N-Play and allows you to remove the IAT from the MAF assembly's on C7 Corvette Stingrays...
WEAPON-X: Whipple Griptec Pulley [Camaro Corvette CTS V, LT1 LT4 LT5]
$249.00
$299.00
The WEAPON-X Griptec pulleys are the new latest and greatest in pulley technology for your LT1 LT4 or LT5 Whipple...
ATI: Super Damper Crank Balancer [Camaro ZL1 gen 6, CTS V gen 3, LT4]
$513.00
$575.00
2016+ LT1 CAMARO SS & LT4 CAMARO ZL1 & LT4 CADILLAC CTS V Options: Choose from none up to a...
Nitrous Express: Billet LT4 Supercharger Lid [Camaro ZL1, Corvette Z06, CTS V]
$1,449.00
$1,499.00
This product is back ordered with no ETA expected this year, but take a look at the new WEAPON❌ BILLET...
WEAPON-X: Procharger Griptec Pulley [Camaro6, Corvette C7, LT1 LT4]
$249.00
$299.00
The WEAPON-X Griptec pulleys are the new latest and greatest in pulley technology for your LT1 LT4 Procharged powered Camaro...
DSX: BARO Breakout Harness [C7 Corvette, CTS V, Camaro:, LT4]
$115.00
$129.00
The DSX LT4 Baro Breakout Harness breaks out the barometric pressure sensor, which allows the calibrator to restore proper calculations in...
WEAPON-X: SuperFlow2 Air Intake - Carbon Fiber [Camaro ZL1 gen 6, LT4]
$499.00
$554.44
The sixth generation Camaro ZL1 leaves very little to be desired in the way of performance coming off the showroom floor. However,...
WEAPON-X: Big Gulp DI Fuel Package [Camaro Corvette CTS V, LT1 LT4 LT5]
$2,199.00
$2,499.00
It's a well-known fact that the LT1 and LT4 engines have fuel starvation issues which directly lead to blown rings...
WEAPON-X: Cooling Package [Camaro SS ZL1 gen 6, CTS V, LT1 LT4]
$1,747.17
$2,157.00
Keep your 6th gen Camaro ZL1 or 3rd gen CTS V cool on the street or track with this Weapon-X cooling package!...
FP: Thermal Reduction Plates [C7 Corvette Z06, Camaro ZL1, CTS V, LT4]
$449.00
$749.00
Whether you're running stock boost on the supercharged C7 Z06 or an upgraded pulley kit, you're already aware of the...
WEAPON-X: 2650 Edelbrock Supercharger Cooling Manifold Adapter
$269.10
$299.00
Billet direct inlet coolant manifold for the Edelbrock 2650 LT1 and LT4 supercharger. Fittings included! Omits the factory manifold...
WEAPON-X: Ported Eaton 1.7L Supercharger [C7 Z06, CTS V, Camaro ZL1, LT4]
$499.00
$599.00
Considering having your supercharger ported? Look no further than a WEAPON-X ported supercharger! Supercharger porting is proven to help free up...
Innovators West: Crank Balancer [Camaro ZL1 gen 6, CTS V gen 3, LT4]
$670.63
$725.00
Lower Crank Balancer for your 2016+ CTS V gen 3 or Camaro ZL1 gen 6 LT4, or LT1 Camaro SS...
Fasterproms: 2.31" Upper Pulley [LT4 Camaro, Corvette, CTS V]
$199.00
Looking to spin that supercharger harder and make more power? Add this smaller solid 1 piece upper pulley to the...
WEAPON-X: LT4 Eaton Supercharger Lid - Carbon Fiber [Camaro6 Corvette C7 CTS V]
$799.00
$879.00
The C7 ZR1's engine makes some massive power; however, with this power comes a lot of heat too! Have you...
WEAPON-X: Whipple LT1 LT4 Cooling Adapters [Camaro Corvette CTS V, LT]
$299.70
$330.00
These billet adapters are a direct replacement! Whipple’s gen 6 Camaro SS and 1LE, our C7 Corvette LT1 and Camaro...
WEAPON-X: Griptec Magnuson Pulley [Camaro6, Corvette C7, LT1 LT4]
$250.00
$299.00
The WEAPON-X Griptec pulleys are the new latest and greatest in pulley technology for your LT1 LT4 Magnuson powered Camaro,...
WEAPON-X: Griptec Edelbrock Pulley [Camaro6, Corvette C7, LT1 LT4]
$250.00
$299.00
The WEAPON-X Griptec pulleys are the new latest and greatest in pulley technology for your LT1 LT4 Edelbrock powered Camaro,...
Edelbrock Supercharger 2016-21 Camaro ZL1/Cadillac CTS-V LT4 All Trans
$7,251.87
DETAILS The Edelbrock Pro Tuner Supercharger Kit W/O Tuner #155923 is an upgrade intended for the 2016-21 Chevrolet Camaro ZL1...
WEAPON-X.1100 (Stage 8) [Camaro ZL1 gen 6, LT4]
$22,510.00
$24,522.00
The X1100 package is the first kit offering the massive Whipple supercharger upgrade coupled with our new SPI port injection...
WEAPON-X.700 (Stage 1) [Camaro ZL1 gen 6, LT4]
$1,999.00
$2,797.00
Congrats, you've found yourself in the cockpit of a 6th generation Camaro ZL1, arguably the greatest bang for the buck...
WEAPON-X.1000 (Stage 7) [Camaro ZL1 gen 6, LT4]
$19,599.00
$21,523.00
The X1000 package is the first kit offering the massive Whipple supercharger upgrade coupled with our new SPI port injection...
WEAPON-X.900 (Stage 6) [Camaro ZL1 gen 6, LT4]
$11,931.00
$13,942.00
This ZL1 package is the cream of the crop on the stock Eaton 1740 supercharger, taking the stage 5 package...
WEAPON-X.800 (Stage 4) [Camaro ZL1 gen 6, LT4]
$5,749.00
$6,744.00
If you're looking at this package, you're after as much bolt on HP as possible without cracking the motor. We've...
Procharger: F-1A-94, F-1X Air to Water Intercooler Kits [Camaro gen 6 ZL1, LT4]
$11,199.00
** CALL US FOR UNPARALLELED PRICING AS A MASTER DEALER! **Looking for the highest available HP supercharger kits available? Then...
Procharger: F-1A-94, F-1X Air to Air Intercooler Kits [Camaro gen 6 ZL1, LT4]
$9,299.00
** CALL US FOR UNPARALLELED PRICING AS A MASTER DEALER! **Looking for the highest available HP supercharger kits available? Then...
Magnuson: Heartbeat 2300 Supercharger [Camaro ZL1, CTS-V3, LT4]
$4,995.00
Boost the power output of your 2017+ Chevrolet Camaro ZL1 and 2016+ CTS V LT4 while retaining factory-like drivability, fuel economy,...