Whipple: 2.9L Supercharger [CTS V gen 2, LSA]
Looking to add a bigger supercharger? Look no further as the KDi Whipple should be your choice. This product requires added clearance from the WEAPON-X V Power CTS V hood, Camaro ZL1 requires wiper cowl clearance.
WHAT SEPERATES THE WHIPPLE FROM THE COMPETITION
- Positive displacement twin screw design has the highest efficiency of all superchargers including roots and centrifugal
- Higher efficiency means more power at all rpm levels
- Unique Whipple twin screw design provides the largest power gains across entire rpm range
- Latest screw compressor rotor profile designed today, offering superior flow vs. efficiency vs. physical dimensions
- Conformal rotor coating for increased performance
- Lowest tolerance level of all aftermarket positive displacement superchargers, offering the highest quality
- Low tolerance levels increase performance across entire rpm operating range
- Double angular front bearings for superior strength and durability
- Rear roller bearing, with double seal for superior durability
- Precision cut helical gears for precise rotor clearances, for superior performance and low noise levels
- Rear bearing out design for increased clearance for packaging restraints
- Serviceable and upgradable design for superior longevity
- Similar screw compressor design as the Ford GT supercar
- Similar screw compressor technology that Mercedes has utilized on all their latest vehicles including the 600hp McLaren SLR, E55AMG, S55, CL55, SLK32 and SL55
- Dyno proven to produce more horsepower and torque than any other supercharger throughout the entire rpm range
- Industry leading near-zero noise levels (db)
- 100,000 mile oil change intervals
- Marine approved rotor coating
- Unmistakable industry leading fit and finish
- True technological leader in supercharger industry
DSX: Flex Fuel Sensor Kit [Camaro Corvette CTS V G8 GTO SS]
The DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV/Gen V...
Innovators West: Crank Balancer [Camaro ZL1 gen 5, CTS V gen 2, LSA]
Lower Crank Balancer for your 2009-15 CTS V gen 2 or 2012-15 Camaro ZL1 gen 5 LSA. This balancer allows...
LPE: 100mm Idler Pulley [Corvette, Camaro, CTS V, LSA LS9 LT4]
This 100 mm diameter idler pulley can be used to correct belt length when changing supercharger pulleys or harmonic balancer...
LPE: 76mm Idler Pulley [Corvette, Camaro, CTS V, LSA LS9 LT4]
This 76mm diameter idler pulley can be used to correct belt length when changing supercharger pulleys or harmonic balancer sizes...
LPE: Eaton 2.3L High Flow Supercharger Snout [C6 Corvette ZR1, LS9]
The Lingenfelter C6 ZR1 LS9 supercharger snout or supercharger front cover provides reduced pressure drop and increased horsepower on stock...
LPE: LSA Idler Relocation Bracket and Idler Kit [Camaro ZL1 gen 5, CTS V gen 2, LSA]
The Lingenfelter LSA Idler Relocation Bracket is designed for the Cadillac CTS-V 2009-2015, or ZL1 Camaro 2012-2015 to allow the...
Magnuson: 2009-14 CADILLAC CTS-V LSA AND CHEVY CAMARO ZL1 MAGNUM TVS2650 SUPERCHARGER SYSTEM
Designed specifically for the LSA-powered second-generation Cadillac CTS-V, the all-new Magnum Performance Series TVS2650 sets the gold standard for performance....
Magnuson: Heartbeat 2300 Supercharger [Camaro ZL1, CTS V, LSA]
The most powerful TVS2300 Supercharger on the marketMagnuson is proud to announce our Heartbeat supercharger system for the 2012-2015 Chevy...
Metco: 100mm Idler Pulley [CTS V gen 2, Camaro ZL1 gen 5, LSA]
This 100mm billet idler pulley is designed to replace the factory idler pulley located directly beneath and to the left...
Metco: Idler Bracket [CTS V gen 2, Camaro ZL1 gen 5, LSA]
This precision-machined idler relocation bracket is designed specifically for the GM LSA application. The bracket installs as a direct replacement for the...
Metco: Interchangeable Upper Pulley Kit [CTS V, Camaro ZL1, LSA]
Looking for more boost your your 2009-15 Cadillac CTS V or 2012-15 Camaro ZL1? Change the ratio the blower spins...
Metco: Lower Crank Pulley Ring [CTS V, Camaro, LSA LT4]
Looking for more boost your your LSA or LT4 Camaro ZL1 or CTS V? Change the ratio the blower spins...
Metco: Solid Isolator [Camaro ZL1, CTS V, LSA]
Tired of the marble noise coming from your blower? Replace the spring loaded coupler with this solid isolator from Metco!...
Metco: Upper Pulley Kit [CTS V gen 2, Camaro ZL1 gen 5, LSA]
Choice of 2.5 or 2.4 upper pulley, 100mm idler, and isolator Looking for more boost your your 2009-15 Cadillac CTS...
Nick Williams: LS 112mm Throttle Body [Corvette Camaro CTS V, LS]
Nick Williams made 112mm throttle body for Gen 4 LS vehicles with modified inlet. This is a billet 5 axis CNC...
SNL: 1400hp Twin Turbo Kit [CTS V gen 2, LSA]
Everyone knows what you need to look at for big boosted power... twin turbos! The first production TT kit that...
WEAPON-X: Ported Eaton 1.9L Supercharger [CTS V, Camaro ZL1, LSA]
Considering having your supercharger ported? Look no further than a WEAPON-X ported supercharger! Supercharger porting is proven to help free up...
WEAPON-X: Pulley Injector Kit [CTS V gen 2, Camaro ZL1 gen 5, LSA]
We're offering some major discounts on various pulley and injector kits for your LSA powered gen 2 Cadillac CTS V...
WEAPON-X: 112mm Throttle Body Adapter [LS LT1 LT4]
Billet Nick Williams 112 Throttle Body Adapter Fits: LS2 LS3 LS6 LS7 LS9 LSA LT1 LT4 Camaro Corvette CTS-V G8...
WEAPON-X: 3.4L Twin Screw PD Supercharger [CTS V gen 2, LSA]
As the thirst for more power rages, eventually the you'll reach the limits of your 2009+ CTS V. Search no...
WEAPON-X: Eaton 1.9L Lid Spacer - Meth or Nitrous Options [CTS V, Camaro ZL1, LSA]
This a must have performance product for any modified CTS-V that is running a higher than stock amount of boost....
WEAPON-X: Griptec Pulley [CTS V gen 2, Camaro ZL1 gen 5, LSA]
The WEAPON-X Griptec pulleys are the new latest and greatest in pulley technology for your gen 2 CTS-V and gen...
WEAPON-X: High Flow Heat Exchanger Pump kit [CTS V Camaro ZL1, LSA]
Even stock CTS Vs will see upgraded cooling by changing to this higher flow heat exchanger pump. Pump Fittings Wiring...
WEAPON-X: Lower Crank Pulley Kit [CTS V gen 2, Camaro ZL1 gen 5, LSA]
Looking for more boost your your 2009-15 Cadillac CTS-V, 2012-15 Camaro ZL1? Change the ratio the blower spins with one of these...
Whipple: 2.9L Supercharger [CTS V gen 2, LSA]
Looking to add a bigger supercharger? Look no further as the KDi Whipple should be your choice. This product requires...