2009-2015 CTS-V2 (LSA) Forced Induction

2009-2015 CTS-V2 (LSA) Forced Induction
GM Performance Division did an amazing job taking the 2009+ Cadillac CTS-V to the next level in the world rivalry by adding forced induction to an already impressive 376CI good ol' American pushrod V8!  The heart of the beast is a little 1.9L Eaton supercharger sitting atop that motor.  Reworking the blower to flow more air and changing the pulley ratio to spin the blower lobes faster will produce more HP but also more heat!  Spin it hard, but also address the heat with one of our heat exchangers.  The factory blower can get you up to 700rwhp but if you want more than that or desire a larger blower spinning more in it's efficiency range, take a look at our upgraded blower packages.  If the factory blower will fit your needs, peruse our package deals too for some guidance and always feel free to email us at sales@weapon-x.com for recommendations on your end game!
DSX: Flex Fuel Sensor Kit [Camaro Corvette CTS V G8 GTO SS]
$299.00 $349.00
The DSX Tuning flex fuel kit is the original plug and play solution to adding flex fuel on Gen IV/Gen V...
Innovators West: Crank Balancer [Camaro ZL1 gen 5, CTS V gen 2, LSA]
Innovators West:  Crank Balancer  [Camaro ZL1 gen 5, CTS V gen 2, LSA] New Sale
$670.63 $725.00
Lower Crank Balancer for your 2009-15 CTS V gen 2 or 2012-15 Camaro ZL1 gen 5 LSA.  This balancer allows...
LPE: 100mm Idler Pulley [Corvette, Camaro, CTS V, LSA LS9 LT4]
LPE:  100mm Idler Pulley  [Corvette, Camaro, CTS V, LSA LS9 LT4] New Sale
$216.00 $249.00
This 100 mm diameter idler pulley can be used to correct belt length when changing supercharger pulleys or harmonic balancer...
LPE: 76mm Idler Pulley [Corvette, Camaro, CTS V, LSA LS9 LT4]
LPE:  76mm Idler Pulley  [Corvette, Camaro, CTS V, LSA LS9 LT4] New Sale
$124.00 $129.00
This 76mm diameter idler pulley can be used to correct belt length when changing supercharger pulleys or harmonic balancer sizes...
LPE: Eaton 2.3L High Flow Supercharger Snout [C6 Corvette ZR1, LS9]
$1,600.00
The Lingenfelter C6 ZR1 LS9 supercharger snout or supercharger front cover provides reduced pressure drop and increased horsepower on stock...
LPE: LSA Idler Relocation Bracket and Idler Kit [Camaro ZL1 gen 5, CTS V gen 2, LSA]
LPE:  LSA Idler Relocation Bracket and Idler Kit [Camaro ZL1 gen 5, CTS V gen 2, LSA] New Sale
$95.00 $109.00
The Lingenfelter LSA Idler Relocation Bracket is designed for the Cadillac CTS-V 2009-2015, or ZL1 Camaro 2012-2015 to allow the...
Magnuson: 2009-14 CADILLAC CTS-V LSA AND CHEVY CAMARO ZL1 MAGNUM TVS2650 SUPERCHARGER SYSTEM
Magnuson:  2009-14 CADILLAC CTS-V LSA AND CHEVY CAMARO ZL1 MAGNUM TVS2650 SUPERCHARGER SYSTEM New
$7,295.00
Designed specifically for the LSA-powered second-generation Cadillac CTS-V, the all-new Magnum Performance Series TVS2650 sets the gold standard for performance....
Magnuson: 2650 Supercharger [Camaro ZL1, CTS V, LSA]
$7,795.00
Designed specifically for the LSA-powered second-generation Cadillac CTS-V and fifth-generation Chevrolet Camaro ZL1, the all-new Magnum Performance Series TVS2650 sets...
Metco: 100mm Idler Pulley [CTS V gen 2, Camaro ZL1 gen 5, LSA]
Metco: 100mm Idler Pulley  [CTS V gen 2, Camaro ZL1 gen 5, LSA] New
$119.99
This 100mm billet idler pulley is designed to replace the factory idler pulley located directly beneath and to the left...
Metco: Idler Bracket [CTS V gen 2, Camaro ZL1 gen 5, LSA]
Metco: Idler Bracket  [CTS V gen 2, Camaro ZL1 gen 5, LSA] New Sale
$115.99 $125.00
This precision-machined idler relocation bracket is designed specifically for the GM LSA application.  The bracket installs as a direct replacement for the...
Metco: Interchangeable Upper Pulley Kit [CTS V, Camaro ZL1, LSA]
Metco: Interchangeable Upper Pulley Kit [CTS V, Camaro ZL1, LSA] New Sale
$159.99 $179.99
Looking for more boost your your 2009-15 Cadillac CTS V or 2012-15 Camaro ZL1?  Change the ratio the blower spins...
Metco: Lower Crank Pulley Ring [CTS V, Camaro, LSA LT4]
$115.99
Looking for more boost your your LSA or LT4 Camaro ZL1 or CTS V?  Change the ratio the blower spins...
Metco: Solid Isolator [Camaro ZL1, CTS V, LSA]
Metco: Solid Isolator  [Camaro ZL1, CTS V, LSA] New
$79.99
Tired of the marble noise coming from your blower?  Replace the spring loaded coupler with this solid isolator from Metco!...
Metco: Upper Pulley Kit [CTS V gen 2, Camaro ZL1 gen 5, LSA]
Metco: Upper Pulley Kit  [CTS V gen 2, Camaro ZL1 gen 5, LSA] New Sale
$345.00 $365.00
Choice of 2.5 or 2.4 upper pulley, 100mm idler, and isolator Looking for more boost your your 2009-15 Cadillac CTS...
Nick Williams: LS 112mm Throttle Body [Corvette Camaro CTS V, LS]
$899.00
Nick Williams made 112mm throttle body for Gen 4 LS vehicles with modified inlet.  This is a billet 5 axis CNC...
SNL: 1400hp Twin Turbo Kit [CTS V gen 2, LSA]
$10,999.00
Everyone knows what you need to look at for big boosted power... twin turbos!  The first production TT kit that...
WEAPON-X: Ported Eaton 1.9L Supercharger [CTS V, Camaro ZL1, LSA]
$499.00 $549.00
Considering having your supercharger ported?  Look no further than a WEAPON-X ported supercharger!  Supercharger porting is proven to help free up...
WEAPON-X: Pulley Injector Kit [CTS V gen 2, Camaro ZL1 gen 5, LSA]
$1,236.00 $1,454.00
We're offering some major discounts on various pulley and injector kits for your LSA powered gen 2 Cadillac CTS V...
WEAPON-X: 112mm Throttle Body Adapter [LS LT1 LT4]
$72.00 $80.00
Billet Nick Williams 112 Throttle Body Adapter Fits: LS2 LS3 LS6 LS7 LS9 LSA LT1 LT4 Camaro Corvette CTS-V G8...
WEAPON-X: 3.4L Twin Screw PD Supercharger [CTS V gen 2, LSA]
$7,999.00
As the thirst for more power rages, eventually the you'll reach the limits of your 2009+ CTS V.  Search no...
WEAPON-X: Eaton 1.9L Lid Spacer - Meth or Nitrous Options [CTS V, Camaro ZL1, LSA]
WEAPON-X: Eaton 1.9L Lid Spacer - Meth or Nitrous Options  [CTS V, Camaro ZL1, LSA] New Sale
$499.00 $599.00
This a must have performance product for any modified CTS-V that is running a higher than stock amount of boost....

Scroll To Top