Here is a spreadsheet to reference when you're planning/modding to help you figure out what you need at what levels. Granted all of this depends on a wide variety of things from plans of use for the car like street, strip, and/or track to where you are, ie temps, atmosphere, climate changes etc. Less air restriction such as free flowing intake, headers, exhaust, porting etc all drastically help reduce heat by increasing the ease of the blower and airflow in and out of the engine. Your cam profile will also affect the air movement!
Keep in mind, preventative heat mods such as heat exchangers, tanks, pumps etc can't be done too early really. Stock CTS V's pull timing between pull 2 and pull 3 on the dyno due to increased heat. Even stock LSA powered vehicles can benefit from some of these mods, but they really become a necessity as you push the blower. Even as you add more blower RPM, you have to add other parts to reduce restrictions and protect your motor. So, feel free to get a hold of us and we'll help point you in the right direction for your planned end game.
For packages with the below combinations, use the search box in the top right corner and type in your vehicle, engine, and the type of kit you're after like pulley kit or fuel kit and see what we've put together! Our Griptech pulleys offer unparalleled performance. Here is an LSA Pulley and Fuel kit for example:
https://weaponxmotorsports.com/products/weapon-x-pulley-injector-kit-cts-v-gen-2-camaro-zl1-gen-5-lsa-1
You can see the effective blower ratio in the first column, the % of increase over stock in the second column, the RPM of the blower vs. the engine RPM in the third column, upper pulley size in the 4th, crank pulley size in the 5th, idler options in the 6th and 7th column, and estimated boost pressure with proper supporting mods in the 8th column.
Scrolling down to the next section, columns 1-3 are repeated, column 4 what injectors are needed on pump gas (not E85), if you need to do one of our heat exchanger upgrades in column 5, heat exchanger pump upgrade in column 6, and lastly a heat exchanger tank in column 7.
Questions or to put in a custom order, call 513-662-4000 or email sales@weapon-x.com
| Blower Ratio | % Increase | Blower RPM at 6,700 RPM |
WEAPON-X Griptec |
Crank Pulley | Idler #1 50mm | Idler #2 100mm | Bracket Needed | Boost (psi) |
| Stock 2.74 | 0.00% | 18,358 | 2.95 | 8.10 | 0 | 0 | N | 8.6 |
| 2.92 | 6.40% | 19,532 | 2.95 | 8.60 | 50 | 0 | N | 10.5 |
| 3.08 | 12.58% | 20,668 | 2.95 | 9.10 | 50 | 0 | N | 11.5 |
| 3.22 | 17.53% | 21,576 | 2.95 | 9.50 | 50 | 0 | N | 13 |
| 3.39 | 23.72% | 22,712 | 2.95 | 10.00 | 50 | 0 | Y | 14 |
| 3.56 | 29.90% | 23,847 | 2.95 | 10.50 | 50 | 0 | Y | 15 |
| 2.84 | 3.73% | 19,042 | 2.85 | 8.10 | 0 | 0 | N | 9 |
| 3.02 | 10.13% | 20,218 | 2.85 | 8.60 | 50 | 0 | N | 11 |
| 3.19 | 16.53% | 21,393 | 2.85 | 9.10 | 50 | 0 | N | 12.5 |
| 3.33 | 21.65% | 22,333 | 2.85 | 9.50 | 50 | 0 | N | 14 |
| 3.51 | 28.06% | 23,509 | 2.85 | 10.00 | 50 | 100 | Y | 15 |
| 3.68 | 34.46% | 24,684 | 2.85 | 10.50 | 50 | 100 | Y | 16 |
| 3.24 | 18.25% | 21,708 | 2.50 | 8.10 | 0 | 100 | N | 12 |
| 3.44 | 25.55% | 23,048 | 2.50 | 8.60 | 50 | 100 | N | 14 |
| 3.64 | 32.85% | 24,388 | 2.50 | 9.10 | 50 | 100 | N | 15.5 |
| 3.82 | 39.42% | 25,594 | 2.50 | 9.55 | 50 | 100 | N | 17 |
| 4.00 | 45.99% | 26,800 | 2.50 | 10.00 | 50 | 100 | Y | 18 |
| 4.20 | 53.28% | 28,140 | 2.50 | 10.50 | 50 | 100 | Y | *BOOM* |
| 3.38 | 23.18% | 22,613 | 2.40 | 8.10 | 0 | 100 | N | 15 |
| 3.58 | 30.78% | 24,008 | 2.40 | 8.60 | 50 | 100 | N | 15.5 |
| 3.79 | 38.38% | 25,404 | 2.40 | 9.10 | 50 | 100 | N | 17 |
| 3.96 | 44.46% | 26,521 | 2.40 | 9.50 | 50 | 100 | N | 18 |
| 4.17 | 52.07% | 27,917 | 2.40 | 10.00 | 50 | 100 | Y | *BOOM* |
| 4.38 | 59.67% | 29,313 | 2.40 | 10.50 | 50 | 100 | Y | *BOOM* |
| Blower Ratio | % Increase | Blower RPM at 6,700 RPM | Injectors (93/91 Oct) | WEAPON-X Heat Exchanger Needed | High Flow Pump | HX Tank Needed | ||
| Stock (2.74) | 0.00% | 18,358 | Stock | Stock | No | No | ||
| 2.92 | 6.40% | 20,668 | Stock | Stock | No | No | ||
| 3.08 | 12.58% | 20,668 | Stock | 36" Single Wide | Maybe | Maybe | ||
| 3.22 | 17.53% | 21,576 | Stock | 36" Single Wide | Maybe | Maybe | ||
| 3.39 | 23.72% | 22,712 | 63lb and up | 36" Single Wide | Yes | Yes | ||
| 3.56 | 29.90% | 23,847 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 2.84 | 3.73% | 19,042 | Stock | Stock | No | No | ||
| 3.02 | 10.13% | 21,393 | Stock | Track Attack | Maybe | Maybe | ||
| 3.19 | 16.53% | 21,393 | Stock | Track Attack | Maybe | Maybe | ||
| 3.33 | 21.65% | 22,333 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.51 | 28.06% | 23,509 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.68 | 34.46% | 24,684 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.24 | 18.25% | 21,708 | 63lb and up | 36" Single Wide | Maybe | Maybe | ||
| 3.44 | 25.55% | 24,388 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.64 | 32.85% | 24,388 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.82 | 39.42% | 25,594 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 4.00 | 45.99% | 26,800 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 4.20 | 53.28% | 28,140 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.38 | 23.18% | 22,613 | 90lb and up | Track Attack | Yes | Yes | ||
| 3.58 | 30.78% | 25,404 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.79 | 38.38% | 25,404 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.96 | 44.46% | 26,521 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 4.17 | 52.07% | 27,917 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 4.38 | 59.67% | 29,313 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| * This chart was compiled for stock LSA cubes, larger cube motors move more air and thus require more fuel. | ||||||||
| ** Disclaimer: This is only to be used for reference guide. Tuning, Atmosphere, Temperature, Fuel, Air Flow etc all play a factor in the desired outcome. | ||||||||
LSA Available Pulley Combos and Supporting Mods Needed – WEAPON-X Motorsports
fzeiodnmhm http://www.g53111912nftt9zzgu3z2jz5i762x8crs.org/
afzeiodnmhm
[url=http://www.g53111912nftt9zzgu3z2jz5i762x8crs.org/]ufzeiodnmhm[/url]
I have a 2009 cts-v. It is stock except for Airaid cai and aftermarket mufflers. I live in Denver Colorado so the air is thin. This is my daily driver so I dont want to go too crazy. I want to run flex-fuel. Replace the upper pulley and a tune plus what ever corresponding mods. I’d like to get around 600 rwhp but thats not that important. I would really appreciate a parts list. From what I’ve see, you have the best prices on the internet.
Brian
Hello
My name is Cibas, I work for an SEO agency in Lithuania and right now, I have decided to freelance in my spare time.
I am presently working with several dozen vape and CBD companies and understand the SEO formula to achieve the perfect search engine rankings.
My main area of work is backlink building via vape and cbd blogs and guest posts, branding, forum marketing, lead generation and more.
I have listed all of my services on my page on Fiverr. You can view and purchase my vape and CBD SEO services there: https://www.fiverr.com/cibukas
If you have any questions, please feel free to drop me a line.
I look forward to working with you and taking your website to the very top of the search engines!
Best wishes
Cibas Baltrusaitis
GLOBAL VAPE COMPANY EMAIL LIST OF VAPE SHOPS AND VAPE WHOLESALERS AND E-LIQUID DISTRIBUTORS
Global Vape Company Email List of Vape Shops and Vape Wholesalers and E-Liquid Distributors
Did you know that there are over 38,000 vape companies around the world that you can contact today? Whether you run an e-liquid line or a vape wholesale business, these vape company emails can help you to reach practically all vape companies with your message. Are you tired from not making enough B2B sales to vape shops and vape wholesalers? Do you find most of your marketing to be unproductive? Do you want to take your vape business to the next level and start exploding your sales? Here is the secret sauce that has helped over 500 e-liquid brands and wholesalers from around the world since 2012! Some ejuice companies have even tried to buy us out because they felt that the accessibility of this list was putting them against a lot of competition from smaller vape companies and e-liquid brands! This hopefully helps to illustrate just how powerful this vape company email list is!
HERE IS WHAT THE VAPE COMPANY EMAIL LIST CONTAINS:
Vape Shops (brick-and-mortar and online)
Vape Wholesalers and distributors
E-Liquid Companies
Vape Event Organisers
Vape magazines
Vape reviewers
HERE ARE THE WAYS IN WHICH YOU CAN USE THIS VAPE COMPANY EMAIL LIST
Promotional messages
Introductory emails
Guest post outreach for backlink building
Much more
Buy and learn more at https://bit.ly/2zcDKeX
2011 ctsv sedan looking to do upper pulley, injectors and 180 degree thermostat and possibly a colder plug NKG I already have CAI and ported stock throttle body from v max looking for what kit to get or other recommend alternatives ?