Here is a spreadsheet to reference when you're planning/modding to help you figure out what you need at what levels. Granted all of this depends on a wide variety of things from plans of use for the car like street, strip, and/or track to where you are, ie temps, atmosphere, climate changes etc. Less air restriction such as free flowing intake, headers, exhaust, porting etc all drastically help reduce heat by increasing the ease of the blower and airflow in and out of the engine. Your cam profile will also affect the air movement!
Keep in mind, preventative heat mods such as heat exchangers, tanks, pumps etc can't be done too early really. Stock CTS V's pull timing between pull 2 and pull 3 on the dyno due to increased heat. Even stock LSA powered vehicles can benefit from some of these mods, but they really become a necessity as you push the blower. Even as you add more blower RPM, you have to add other parts to reduce restrictions and protect your motor. So, feel free to get a hold of us and we'll help point you in the right direction for your planned end game.
For packages with the below combinations, use the search box in the top right corner and type in your vehicle, engine, and the type of kit you're after like pulley kit or fuel kit and see what we've put together! Our Griptech pulleys offer unparalleled performance. Here is an LSA Pulley and Fuel kit for example:
https://weaponxmotorsports.com/products/weapon-x-pulley-injector-kit-cts-v-gen-2-camaro-zl1-gen-5-lsa-1
You can see the effective blower ratio in the first column, the % of increase over stock in the second column, the RPM of the blower vs. the engine RPM in the third column, upper pulley size in the 4th, crank pulley size in the 5th, idler options in the 6th and 7th column, and estimated boost pressure with proper supporting mods in the 8th column.
Scrolling down to the next section, columns 1-3 are repeated, column 4 what injectors are needed on pump gas (not E85), if you need to do one of our heat exchanger upgrades in column 5, heat exchanger pump upgrade in column 6, and lastly a heat exchanger tank in column 7.
Questions or to put in a custom order, call 513-662-4000 or email sales@weapon-x.com
| Blower Ratio | % Increase | Blower RPM at 6,700 RPM |
WEAPON-X Griptec |
Crank Pulley | Idler #1 50mm | Idler #2 100mm | Bracket Needed | Boost (psi) |
| Stock 2.74 | 0.00% | 18,358 | 2.95 | 8.10 | 0 | 0 | N | 8.6 |
| 2.92 | 6.40% | 19,532 | 2.95 | 8.60 | 50 | 0 | N | 10.5 |
| 3.08 | 12.58% | 20,668 | 2.95 | 9.10 | 50 | 0 | N | 11.5 |
| 3.22 | 17.53% | 21,576 | 2.95 | 9.50 | 50 | 0 | N | 13 |
| 3.39 | 23.72% | 22,712 | 2.95 | 10.00 | 50 | 0 | Y | 14 |
| 3.56 | 29.90% | 23,847 | 2.95 | 10.50 | 50 | 0 | Y | 15 |
| 2.84 | 3.73% | 19,042 | 2.85 | 8.10 | 0 | 0 | N | 9 |
| 3.02 | 10.13% | 20,218 | 2.85 | 8.60 | 50 | 0 | N | 11 |
| 3.19 | 16.53% | 21,393 | 2.85 | 9.10 | 50 | 0 | N | 12.5 |
| 3.33 | 21.65% | 22,333 | 2.85 | 9.50 | 50 | 0 | N | 14 |
| 3.51 | 28.06% | 23,509 | 2.85 | 10.00 | 50 | 100 | Y | 15 |
| 3.68 | 34.46% | 24,684 | 2.85 | 10.50 | 50 | 100 | Y | 16 |
| 3.24 | 18.25% | 21,708 | 2.50 | 8.10 | 0 | 100 | N | 12 |
| 3.44 | 25.55% | 23,048 | 2.50 | 8.60 | 50 | 100 | N | 14 |
| 3.64 | 32.85% | 24,388 | 2.50 | 9.10 | 50 | 100 | N | 15.5 |
| 3.82 | 39.42% | 25,594 | 2.50 | 9.55 | 50 | 100 | N | 17 |
| 4.00 | 45.99% | 26,800 | 2.50 | 10.00 | 50 | 100 | Y | 18 |
| 4.20 | 53.28% | 28,140 | 2.50 | 10.50 | 50 | 100 | Y | *BOOM* |
| 3.38 | 23.18% | 22,613 | 2.40 | 8.10 | 0 | 100 | N | 15 |
| 3.58 | 30.78% | 24,008 | 2.40 | 8.60 | 50 | 100 | N | 15.5 |
| 3.79 | 38.38% | 25,404 | 2.40 | 9.10 | 50 | 100 | N | 17 |
| 3.96 | 44.46% | 26,521 | 2.40 | 9.50 | 50 | 100 | N | 18 |
| 4.17 | 52.07% | 27,917 | 2.40 | 10.00 | 50 | 100 | Y | *BOOM* |
| 4.38 | 59.67% | 29,313 | 2.40 | 10.50 | 50 | 100 | Y | *BOOM* |
| Blower Ratio | % Increase | Blower RPM at 6,700 RPM | Injectors (93/91 Oct) | WEAPON-X Heat Exchanger Needed | High Flow Pump | HX Tank Needed | ||
| Stock (2.74) | 0.00% | 18,358 | Stock | Stock | No | No | ||
| 2.92 | 6.40% | 20,668 | Stock | Stock | No | No | ||
| 3.08 | 12.58% | 20,668 | Stock | 36" Single Wide | Maybe | Maybe | ||
| 3.22 | 17.53% | 21,576 | Stock | 36" Single Wide | Maybe | Maybe | ||
| 3.39 | 23.72% | 22,712 | 63lb and up | 36" Single Wide | Yes | Yes | ||
| 3.56 | 29.90% | 23,847 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 2.84 | 3.73% | 19,042 | Stock | Stock | No | No | ||
| 3.02 | 10.13% | 21,393 | Stock | Track Attack | Maybe | Maybe | ||
| 3.19 | 16.53% | 21,393 | Stock | Track Attack | Maybe | Maybe | ||
| 3.33 | 21.65% | 22,333 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.51 | 28.06% | 23,509 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.68 | 34.46% | 24,684 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.24 | 18.25% | 21,708 | 63lb and up | 36" Single Wide | Maybe | Maybe | ||
| 3.44 | 25.55% | 24,388 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.64 | 32.85% | 24,388 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.82 | 39.42% | 25,594 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 4.00 | 45.99% | 26,800 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 4.20 | 53.28% | 28,140 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.38 | 23.18% | 22,613 | 90lb and up | Track Attack | Yes | Yes | ||
| 3.58 | 30.78% | 25,404 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.79 | 38.38% | 25,404 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 3.96 | 44.46% | 26,521 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 4.17 | 52.07% | 27,917 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| 4.38 | 59.67% | 29,313 | 90lb and up | Track Attack or 36" Double Wide | Yes | Yes | ||
| * This chart was compiled for stock LSA cubes, larger cube motors move more air and thus require more fuel. | ||||||||
| ** Disclaimer: This is only to be used for reference guide. Tuning, Atmosphere, Temperature, Fuel, Air Flow etc all play a factor in the desired outcome. | ||||||||
All of the video sites I visted and asked this to weren’t able to help me with this but you did and it’s been invaluable to me.
One question though, being a newbie at this sort of thing, what is the technical phrase for this? What is it that’s listed in the product specs on your web pages that told you this Pioneer model could handle the A/V synch issue on the DVD+R discs? I’d just like to know so I know what to look out for in the future is all. Thanks in advance for the reply.
바카라사이트
Victor B, Sorry, I forgot to email you earlier. I recieved the tv in about one week and it is in perfect condition and works like a dream. Thank you so much for excellent customer service and an excellent product.
This will be my only question. I asked you this a while back but hadn’t heard from you so I asked this question on video help message boards but was told there wasn’t a straight answer to it but you understood what I meant and was able to tell me which recorder to get & I couldn’t be more happy with it so I need to ask you this again so you can tell me the phrase I need to look out for so I know which recorders to buy from you in the future. Otherwise I’ll have to keep asking you each time I want to buy a recorder from you which one has the capabilities I need so if you tell me the technical phrase I can find which ones you have that I need for myself and then I could just go and order those ones from you. Becuase you helped me, I don’t want to buy elsewhere in the future so I promise I won’t take the information you give me and shop elsewhere. So here is the message again and hope to hear what the phrase is so I can look for it on your future items for
바카라사이트
I am thrilled to report the transformer arrived safe and sound and is doing its job, driving my Zujirishi bread maker, like a dream. Thank you very much for your efforts to get it shipped.
Thank you for your prompt reply. I received the remaining two boxes yesterday. Things take time to get here but as there was a wide gap in the delivery dates, I was a bit worried. Thank you for your excellent service.
카지노사이트
What I like most about working at DPP is the support network we have in place, for our internal employees, our consultants and our client companies. If I have an issue or question, there is a “specialist” on staff who can help me with that situation
Likewise, I think the reason our client companies are able to put their faith and trust in us is because of the support we are able to provide. It is my belief that, because of how we’re structured and the levels of support we’re able to offer, our client companies have the confidence to allow us to assist them with some of their most crucial staffing needs."
카지노사이트
Hi, here on the forum guys advised a cool Dating site, be sure to register – you will not REGRET it https://bit.ly/2RA7I5l